Less honorary seat: POM
Lock cylinder: PA66
Spring: stainless steel
Steel needle: stainless steel
下座:POM
锁芯:PA66
弹簧:不锈钢
钢针:不锈钢
1. Storage Temperature: -40°C to 90°C, Operating Temperature: -35°C to +80°C.
2. At room temperature, the door lock operation requires a pressing force of 6N ± 1.
Insertion force into the opponent's mounting hole: ≤20N.
Extraction force: ≥50N (dependent on customer hole design).
In the locked state, a clamping force of ≥20N should be applied to the opponent's component.
3. Durability Requirements:
(1) At room temperature, the product should be locked first, wait for 0.5 seconds after locking, then unlock. After unlocking, wait for 0.5 seconds. This constitutes one cycle of operation. The product should undergo over 50,000 cycles of continuous testing under no-load conditions without any functional failure.
(2) At room temperature, under a continuous 6N load, follow the same steps as in (1) above, and the product should undergo over 30,000 cycles of continuous testing without any functional failure.
4. The product must comply with ROHS environmental requirements.
1. 储存温度：—40摄氏度至90摄氏度，使用温度：—35摄氏度至+80摄氏度
2. 在室温下，门锁操作需要6N±1的按压力。
插入对方安装孔的插入力：≤20N。
拔出力:≥50N（取决于客户的孔设计）。
在锁定状态下，应向对手部件施加≥20N的夹紧力。
3. 耐久性要求：
（1）在常温下，应先将产品锁定，待锁定后0.5秒，再开锁。解锁后，等待0.5秒。这构成了一个操作循环。产品应在无负载条件下进行50，000次以上的循环连续测试，无任何功能故障。
（2）在室温下，在连续6N的载荷下，按照上述（1）中相同的步骤，产品应经历超过30,000次循环的连续测试而无任何功能故障。
4. 产品必须符合ROHS环保要求。
